Inquiry

MEINE MERKLISTE

  • Merkliste ist leer
FavoriteLoadingMerkliste löschen

FavoriteLoadingZur Merkliste

An important instrument for long-term monitoring
of anchor walls and excavation pit safety devices

Anchor plates are used to observe the anchor forces on prestressed anchors. This makes them an indispensable instrument for monitoring the functional efficiency and utilization of securing measures in anchorages for slope protection, excavation pits and caverns.

Principle of operation

Two annular steel plates are welded at the edges. The gap between the plates is filled with a hydraulic fluid. The pressure the fluid is under is directly proportional to the anchor load and can be measured with a pressure gauge or an electric pressure sensor. The oil-filled measuring plate is positioned between a base plate and a load distribution plate. The plates are designed so that mutual slippage is impossible and an optimum force transmission is guaranteed.

The load plates can either be equipped with a manometer for direct reading or an electrical pressure sensor for automatic data acquisition.

Our service 

We supply anchor load plates with different load ranges for manual or electrical reading including the necessary accessories.

Highlights

  • Simple assembly 
  • Robust construction
  • Automatic data acquisition possible

Loadplate with Manometer 250 kN DA 155 mm DI 35 mm H 18 mm
Loadplate with electr. pressure sensor  250 kN DA 155 mm DI 35 mm H 18 mm
Distributor plate  250 kN DA 125 mm DI 25 mm H 18 mm
Base plate  250 kN DA 155 mm DI 35 mm H 18 mm
Loadplate with Manometer 500 kN DA 210 mm DI 50 mm H 18 mm
Loadplate with electr. pressure sensor 500 kN DA 210 mm DI 50 mm H 18 mm
Distributor plate 500 kN DA 180 mm DI 25 mm H 23 mm
Base plate 500 kN DA 210 mm DI 50 mm H 23 mm
Loadplate with Manometer 750 kN DA 265 mm DI 100 mm H 18 mm
Loadplate with electr. pressure sensor 750 kN DA 265 mm DI 100 mm H 18 mm
Distributor plate 750 kN DA 235 mm DI 75 mm H 33 mm
Base plate 750 kN DA 265 mm DI 100 mm H 28 mm
Lastplatte mit Manometer  1.000 kN DA 290/305 mm DI 100/120 mm H 18 mm
Loadplate with electr. pressure sensor  1.000 kN DA 290/305 mm DI 100/120 mm  H 18 mm
Distributor plate  1.000 kN DA 260/272 mm DI 75/120 mm  H 38 mm
Base plate  1.000 kN DA 290/302 mm DI 100/120 mm  H 28 mm
Loadplate with Manometer 1.250 kN DA 335 mm DI 130 mm  H 18 mm
Loadplate with electr. pressure sensor 1.250 kN DA 335 mm DI 130 mm  H 18 mm
Distributor plate 1.250 kN DA 305 mm DI 90/120 mm  H 43 mm
Base plate 1.250 kN DA 335 mm DI 130 mm  H 33 mm
Loadplate with Manometer 1.500 kN DA 373 mm DI 160 mm  H 18 mm
Loadplate with electr. pressure sensor 1.500 kN DA 373 mm DI 160 mm  H 18 mm
Distributor plate 1.500 kN DA 345 mm DI 105/154 mm H 53 mm
Base plate 1.500 kN DA 375 mm DI 160 mm H 38 mm
Loadplate with Manometer 2.500 kN DA 385 mm DI 175 mm H 23 mm
Loadplate with electr. pressure sensor 2.500 kN DA 385 mm DI 175 mm H 23 mm
Distributor plate 2.500 kN DA 256 mm DI 173 mm H 63 mm
Base plate 2.500 kN DA 385 mm DI 175 mm H 38 mm
Geodata
First name*

Last name*

Email*

Phone number

Company

Subjects

Your request

Your contact information will be stored in accordance with the terms of our privacy policy. By submitting this form you agree to this use.